PLC programming for a new machine
We bring the operating sequence, sensors, motors and pneumatic movements into one control structure. Machine builders can work with us on the PLC program and HMI software together.
PLC PROGRAMMING · HMI · AUTOMATION
Based in Başakşehir, Istanbul, we develop PLC programs and HMI screens for new and existing machinery. You can commission the software on its own for a machine you built or bought from another supplier.
Tell us about your machineA photo of the PLC model label is a useful starting point.
Keep speed, timings and recipes on one screen.
Operators adjust drive speed within the permitted range.
Set the start delay and cycle time separately.
Recall saved settings when the product or mode changes.
We bring the operating sequence, sensors, motors and pneumatic movements into one control structure. Machine builders can work with us on the PLC program and HMI software together.
A new product, a different fill volume, an additional station or a revised sequence: we review the existing program and hardware before planning the required automation changes.
We develop product recipes, settings, alarm explanations and machine-status screens for the operator touchscreen. The PLC controls the operating sequence; the HMI makes that process understandable to the operator.
If you do not yet have a PLC, we can establish the I/O, communication and expansion requirements together. We can source a suitable PLC and HMI, prepare the software and ship the hardware to you.
Our PLC programming service is independent of the controller brand. We can assess projects using new or existing controllers from Samkoon, Siemens, Delta, Mitsubishi, Omron and other manufacturers.
PLC · HMI + PLC
SIMATIC S7-1200 · S7-1500 · S7-300/400
DVP · AS · AH
MELSEC FX · iQ-F · iQ-R
CP · CJ · NJ · NX
Modicon M221 · M241 · M251 · M262
Micro800 · CompactLogix · ControlLogix
XGB · XGT / XGI / XGK
FBs · B1
We can also work with manufacturers such as Kinco, Inovance, Wecon, Beckhoff, WAGO, B&R, Panasonic, Keyence, Phoenix Contact, Festo, ABB, Eaton and Hitachi. Projects using CODESYS-based controllers can also be considered.
Cannot see your model here? Send a photo of its CPU or model code. We will establish the programming environment, necessary licences and access to the existing project for that specific controller.
We can develop software for liquid filling, powder filling, bottom-up filling, vertical packaging and horizontal packaging machinery. For other production machines, share the operating sequence, connected equipment and the change you need.
Software can be a standalone service. If PLC or HMI sourcing is also required, we can define that as a separate part of the project.
PLC, HMI and Machine Automation GuidesFor machinery in Istanbul, we start with the controller model and the operating sequence you need. If the job calls for I/O checks, operator screen tests or on-site commissioning, we agree on the scope of the visit before quoting.
If your machine is outside Istanbul and the project can be prepared on the controller, you can ship your PLC or HMI to us for programming and have it sent back.
If you do not have the hardware, we can source the PLC and send it with the program loaded. Shipping, deliverables and the machine-side testing arrangements are agreed before work starts.
Loading a program into a controller and testing the connected machine on site are separate steps. We establish which steps your project needs at the outset.
Describe what the machine does and what should change. A short video, a PLC/HMI label photo and available electrical drawings help with the initial assessment.
We discuss the sequence, screens, recipes, drives and communication requirements. Software work, hardware sourcing and testing are defined separately.
We prepare the PLC program and, where needed, HMI screens. The installed hardware and project conditions determine the control structure and the preliminary tests that can be carried out.
We plan program loading, the agreed project files and machine tests. For work by shipment, we also agree dispatch and return delivery arrangements.
Yes. We provide PLC programming, HMI design and automation software for machinery you build yourself or buy from another manufacturer. A machine purchase is not required.
We assess projects without restricting enquiries to a particular brand. For Samkoon, Siemens, Delta, Mitsubishi, Omron, Schneider Electric and other controllers, we review the CPU model, engineering software, licences and project access before confirming the scope. Send the model code to get started.
Yes, where the project is suitable. You can send the controller and receive it back after programming. We first agree the machine connections, testing requirements and project files to be delivered.
Yes. We can select the PLC, I/O modules and HMI around the machine’s requirements, source the hardware and prepare the software. The model, supply conditions and software scope are confirmed during quotation.
We first review the controller model and the files that are available. An editable source project cannot always be retrieved from the device. Using the operating sequence and electrical drawings, we can assess whether modification or a new program is appropriate.
The operating sequence, I/O, drives, communication, HMI screens, recipes and testing requirements determine the scope. Hardware sourcing and shipping are identified separately where needed. A model label and short operating video help us assess the work.
We can include machine-side testing and commissioning in the quote where the project requires it. Before the visit, we agree when the machine will be ready, which connections are needed and which operations we will verify together.
We start with the alarm, the state of the PLC and HMI and the step where the fault occurs. A sensor, drive or wiring issue may call for a different repair. A photo of the alarm and a short video help us assess the fault.
We agree in writing which PLC and HMI project files, backups and any licences are included. This gives you a clear record of what you will have access to for future changes.
Timing depends on the operating sequence, available drawings and project files, access to the hardware and required tests. Share a short video, the PLC and HMI models and the changes you need so we can estimate delivery and testing.
Thank you. We’ll be in touch.