PLC Programming Languages Explained: Ladder and Structured Text
Understand Ladder, Structured Text, FBD and SFC, how PLC languages differ from development software, and what matters when choosing an approach for your machine.
PLC programming languages include Ladder Diagram (LD), Structured Text (ST) and Function Block Diagram (FBD). Ladder represents operating conditions with contacts and coils. ST expresses calculations and data processing in text. FBD connects functions as graphical blocks. The right choice depends on the machine, the controller’s capabilities and the maintenance team.
If you need programming for a machine, start by describing its operating sequence. Which sensor detects the product? When should the motor run? What should stop the cycle? The programming approach follows from these requirements and the existing hardware.
We develop PLC software and HMI projects in Başakşehir, Istanbul. Leave your name and phone number below to discuss a new machine or changes to an existing system. We provide remote support across Turkey and can receive suitable devices by courier for programming.
Let’s talk about your machine
If you’d like to talk, leave your name and phone number and we’ll give you a call.
Thank you. We’ll be in touch.
A PLC language and programming software are different things
Ladder is a programming language. TIA Portal, WPLSoft, ISPSoft and SamSoar are development tools used to prepare projects. Installing a tool does not mean that the connected PLC supports every language it offers. Check the exact CPU model, firmware and development software version together.
In Siemens documentation, you may see LAD for Ladder and SCL for the Structured Text approach. When working with a project from another manufacturer, names, instructions and addressing may differ. Similar-looking programs still require compatibility checks before moving between controllers. Siemens standardization guideline
What is Ladder logic used for?
In Ladder, contacts show whether conditions are satisfied, while coils indicate where the result is written. Its resemblance to relay circuits can make operating permissions easier to follow. A software contact may represent a physical sensor, an internal state or another Boolean variable.
Consider a conveyor that needs both a run command and a process-ready signal. When both are true, the program can produce a motor run request. If the sensor signal is missing, online monitoring can help locate the condition preventing the sequence from advancing. This is one example of how Ladder can support maintenance.

What is Structured Text?
Structured Text lets you write conditions and calculations as text. It can be useful for evaluating product parameters, comparing numerical values or processing arrays of data. Clear variable names and a well-organized program help the next person maintain it.
The following original example demonstrates only the combination of two Boolean conditions. Assume that all three variables have been declared as BOOL.
MotorDemand := RunCommand AND ProcessReady;
MotorDemand becomes true when both conditions are true. It becomes false when either condition is lost. This line does not implement latching, a start edge, drive feedback or a machine safety function. A real project requires those aspects to be designed around the operating specification and hardware.
Should you use Ladder or Structured Text?
- Ladder can suit sensor-based operating conditions. Consider whether the maintenance team can read the logic online.
- ST can suit product parameters and calculations. Data types and limit checks should be explicit.
- FBD or reusable function blocks can suit repeated functions. Document the inputs, outputs and limits of each block.
- SFC or a state-based structure can suit sequential operation. Each step needs clear transition and fault conditions.
These comparisons provide a starting point for design. A task may be implemented in more than one way, and a supporting environment may allow different languages in different program sections. ABB’s editor documentation also explains limits when converting graphical languages, including special elements and syntax requirements. Verify the resulting behavior after an automatic conversion. ABB editor and conversion documentation
What do FBD, SFC and IL mean?
FBD represents connections between function blocks graphically. SFC organizes program steps and the transitions between them. Older projects may also use the instruction-list format known as IL.
The frequently repeated statement that there are “five PLC languages” may reflect historical documents. The scope of IEC 61131-3:2025 lists ST, LD and FBD and describes SFC as additional elements for structuring programs. Check your specific controller’s documentation to find the editors actually available for it. IEC 61131-3:2025 scope preview
Choosing a language for Samkoon, Delta or Siemens
A brand name alone is insufficient. Different series from the same manufacturer may use different development tools, instruction sets and project formats. When requesting a review, provide the CPU label, project file and software version together.
For Delta, our WPLSoft and ISPSoft guide explains software selection. For Samkoon FAS PLCs and SK HMIs, the official download guide in Turkish links to the manufacturer’s resources. The HMI operator interface has its own project requirements. Editing panel buttons and changing the PLC operating sequence involve different parts of the system.
Questions from machine owners
Do I need Python to program a PLC?
First identify the languages and development environment supported by the device. Using Python for a PC application does not establish that the same code can be loaded onto your PLC. The control project must match the hardware.
Must an existing Ladder program be converted to ST?
Review the requested change, the readability of the existing program and the CPU. A complete conversion requires additional verification. In some projects, adjusting a limited part of the current program is sufficient.
Can the program be changed without a backup?
Read permissions, protection and available archives determine the options. The controller may not return the complete source project, comments and symbols. Prepare the information in our PLC backup guide before planning changes.
Discuss your machine’s programming requirements
Send the CPU model and intended operating sequence for a new machine, a program modification or an HMI update. Başakşehir Makine provides PLC programming and automation support from Başakşehir, Istanbul, across Turkey. We assess remote access and courier delivery of suitable devices according to the project.